EV Power Australia for Lithium Batteries and Chargers

CBM-LFP08 Cell Module for 3.2V LiFePO4 cells (no fly lead)

Availability: In stock

Excl. Tax(GST): $15.00 Incl. Tax(GST): $16.50

Quick Overview


Battery Management cell balancer/monitor module suitable for a LiFePO4 (LFP) cells with M8 bolts and also GBS cells with 2 x 4mm bolts.

The CM-LFP is suitable for a range of cell sizes, it has an 8.5mm hole on the negative side and a 3mm hole on the positive side to allow connection of a fly lead to the positive terminal. Note that the fly lead is not supplied with these untis.
Most specifically this size of cell module is suitable for Winston/Thundersky LYP90 - 160AHA cells.

NOTE: This cell module has screw holes to suit our range of GBS batteries 40,60 100Ah

- Up to 1000mA shunt balancing current
- EPOXY ENCAPSULATED (the only one on the market!)
- Commences balancing above 3.50V
- Utilizes the unique EV Power one wire current loop interface, simply daisy chain the signal terminals together.
- 2.6V undervoltage, 4.0V over-voltage signalling.
- Reverse Polarity protected

- Overvoltage protection (>4.5V) via internal fuse. Module is permanently disabled.
- The lowest profile of ANY cell top BMS balancer, does not protrude above terminal bolt level.
- Gold plated connections
- operational current < 3mA to prevent battery self discharge (<3mA at 3.2V)
<250uA @ 2.5V
- Designed and manufactured in Australia

CBM-LFP08 Cell Module for 3.2V LiFePO4 cells (no fly lead)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


Battery Management cell module suitable for a range of LiFePO4 cells

Additional Information

Admin No
Download Attachment
pdfCell Module Installation(1004.73 KB )Download
pdfCM Datasheet(259.43 KB )Download