EV Power Australia for Lithium Batteries and Chargers

CBM12V - Battery Balance/Monitor module for 12V Batteries, Lead Acid or 4 cell LiFePO4

Availability: In stock

Excl. Tax(GST): $18.50 Incl. Tax(GST): $20.35

Quick Overview

BMS-CBM12V

Designed to balance LFP12V40AH and LFP12V60AH batteries connected in series up to 48V.
This module operates similarly to our single cell modules, except it works across 4 cells (12.8V).
So one module is required only for every four cells.
An afforable BMS alternative for use with our LFP12V series batteries.

Features:
- OK signal between 11V and 15.4V, Green LED on.
- Balancing current up to 200mA, balancing starts at 14.4V, red LED on.
- For use with our LFP12V batteries when connected in series. One per four cell battery.
- May also be used to balance 12V Sealed Lead Acid batteries connected in series.
- Uses the EV Power developed one wire current loop signal interface for BMS control.
- recommended for voltages up to 50V, four batteries.


The theory is that if any cell goes below 2V the total voltage of 4 cells will dip below 11V and trip the signal output.
The 12V batteries are comprised of closely matched cells and so within the battery structure the cells will remain balanced.

CBM12V - Battery Balance/Monitor module for 12V Batteries, Lead Acid or 4 cell LiFePO4

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

.

Additional Information

Admin No